مدل سازی، طراحی و ساخت راکتور بستر ثابت واکنش تجزیه ی کاتالیستی هیدرازین

Salimi, Mozaffar; Ghanbri Pakdehi, Shahram; Shekarian, Aliakbar

Volume 14, Issue 3 (9-2019) مواد پرانرژی 2019, 14(3): 119-127 | Back to browse issues page

Mendeley

Zotero

RefWorks

Salimi M, Ghanbri Pakdehi S, Shekarian A. مدل سازی، طراحی و ساخت راکتور بستر ثابت واکنش تجزیه ی کاتالیستی هیدرازین. مواد پرانرژی 2019; 14 (3) :119-127
URL: http://isaem.ir/article-1-1276-en.html

مدل سازی، طراحی و ساخت راکتور بستر ثابت واکنش تجزیه ی کاتالیستی هیدرازین

Mozaffar Salimi

, Shahram Ghanbri Pakdehi ^*

, Aliakbar Shekarian

Malek Ashtar , salimi.mozaffar@gmail.com

Abstract: (2869 Views)

In this research, first, a one-dimensional stable model for a catalytic stabilization reactor is presented. All mass transfer, heat transfer and momentum equations are considered in this model with applying appropriate assumptions. The results of modeling predict temperature and concentration changes and also pressure drop along the reactor bed length. By applying the modeling, hydrazine catalytic reactor was designed. The design procedure includes thrust and specific impulse and continues with calculation of the bed diameter. Ammonia dissociation is calculated regards to length of the bed and also mass flux. Finally, the reactor was designed and tested. In these tests, the maximum reactor temperature was 650 ^oC, the ammonia dissociation was 59% and the pressure drop was 1.3 bar, which presented a good fit with the modeling data.

Keywords: Fixed-bed Reactor, Modeling, Reactor Design, Thruster

Full-Text [PDF 988 kb] (661 Downloads)

Type of Study: Research | Subject: واکنشها و راکتورها
Published: 2020/05/18