اثر مقدار دی‌مریل دی‌ایزوسیانات بر رفتاررئولوژیکی و خواص مکانیکی یک پیشرانه جامد مرکب بر پایه HTPB

Mollaei, Ahmad; Ashrafi, Mahdi; Fathi, Navvab

Volume 15, Issue 3 (5-2020) مواد پرانرژی 2020, 15(3): 159-165 | Back to browse issues page

Mendeley

Zotero

RefWorks

Mollaei A, Ashrafi M, Fathi N. اثر مقدار دی‌مریل دی‌ایزوسیانات بر رفتاررئولوژیکی و خواص مکانیکی یک پیشرانه جامد مرکب بر پایه HTPB. مواد پرانرژی 2020; 15 (3) :159-165
URL: http://isaem.ir/article-1-1347-en.html

اثر مقدار دی‌مریل دی‌ایزوسیانات بر رفتاررئولوژیکی و خواص مکانیکی یک پیشرانه جامد مرکب بر پایه HTPB

Ahmad Mollaei ^*

, Mahdi Ashrafi

, Navvab Fathi

Imam Hossein University , a.mollaei@merc.ac.ir

Abstract: (1767 Views)

Several parameters affecting the rheological and mechanical properties of solid composite propellants. Among them, the molar ratio of isocyanate (NCO) to hydroxyl (OH) groups (R value) is one of the important factors. In this research, the effects of changing in the weight ratio of dimeryl diisocyanate (DDI) curing agent related to hydroxyl terminated polybutadiene investigated on different properties of a HTPB based solid composite propellant such as end of mix viscosity, time depending behavior of viscosity, tensile stress, elongation, elastic modulus and hardness. For this purpose, five propellant formulations prepared with various R value in the range of 0.755 to 0.815. Results showed that as the R value increased, end of mix viscosity reduced at the first due to wetting effect resulting from DDI addition and then increased because of progressing curing process. Furthermore, the mechanical properties enhanced by increasing the R value, whereas elongation in maximum stress reduced about 20%.

Keywords: Curing agent, Dimeryl diisocyanate, Propellant, Rheology, Mechanical Properties

Full-Text [PDF 852 kb] (77 Downloads)

Type of Study: Research | Subject: پیشرانه
Published: 2021/06/7