شبیه‌سازی یک‌بعدی آغازش با شاک Comp-B و مقایسه با داده‌های تجربی

Esmali Pourandarabi, Saeed; Soury, Hossein; Taghavi Eishkooh, Peyman

Volume 14, Issue 4 (12-2019) مواد پرانرژی 2019, 14(4): 217-226 | Back to browse issues page

Mendeley

Zotero

RefWorks

Esmali Pourandarabi S, Soury H, Taghavi Eishkooh P. شبیه‌سازی یک‌بعدی آغازش با شاک Comp-B و مقایسه با داده‌های تجربی. مواد پرانرژی 2019; 14 (4) :217-226
URL: http://isaem.ir/article-1-1310-en.html

شبیه‌سازی یک‌بعدی آغازش با شاک Comp-B و مقایسه با داده‌های تجربی

Saeed Esmali Pourandarabi

, Hossein Soury ^*

, Peyman Taghavi Eishkooh

Malek Ashtar University of Technology , h_soury@mut.ac.ir

Abstract: (7301 Views)

Detonation initiation by shock is an important issue in the explosive safety assessment and design of the explosive train and explosive devices. Experimental studies in this area are very difficult, expensive, and require advanced equipment. Therefore, simulation is a useful and suitable way for studying this phenomenon. The purpose of this article is to develop a one-dimensional computer code for simulation of the direct initiation of energetic materials. The Fortran SIN hydrocode, was used for this purpose and the I&G burn model was added to this code. The developed code was used to simulate the direct initiation of the Comp-B by sustained shock pulses. A good agreement was observed between the present simulation results and the results of other references. For example, in the simulation of the initiation of Comp-B by 3.78 GPa shock, the run distance to detonation was 14.8mm, which the difference between this value and the reported experimental data is 5.7%.

Keywords: Shock initiation, Simulation, Fortran-SIN, Reactive Burn model, I&, G, Comp-B

Full-Text [PDF 947 kb] (1452 Downloads)

Type of Study: Research | Subject: زنجیره انفجار
Published: 2020/11/7